Disclaimer:
Medidex is not a provider of medical services and all information is provided for the convenience of the user. No medical decisions should be made based on the information provided on this website without first consulting a licensed healthcare provider.This website is intended for persons 18 years or older. No person under 18 should consult this website without the permission of a parent or guardian.
BAL in Oil
Overview
What is BAL in Oil?
Dimercaprol Injection USP is a colorless or almost colorless liquid chelating agent having a disagreeable, mercaptan-like odor. Each 1 mL sterile BAL in Oil (Dimercaprol Injection USP) contains: 100 mg Dimercaprol in 200 mg Benzyl Benzoate and 700 mg Peanut Oil.
What does BAL in Oil look like?
What are the available doses of BAL in Oil?
Sorry No records found.
What should I talk to my health care provider before I take BAL in Oil?
Sorry No records found
How should I use BAL in Oil?
BAL in Oil (Dimercaprol Injection USP) is indicated in the treatment of arsenic, gold and mercury poisoning. It is indicated in acute lead poisoning when used concomitantly with Edetate Calcium Disodium Injection USP.
Dimercaprol Injection USP is effective for use in acute poisoning by mercury salts if therapy is begun within one or two hours following ingestion. It is not very effective for chronic mercury poisoning.
Dimercaprol Injection USP is of questionable value in poisoning caused by other heavy metals such as antimony and bismuth. It should not be used in iron, cadmium, or selenium poisoning because the resulting dimercaprol-metal complexes are more toxic than the metal alone, especially to the kidneys.
By deep intramuscular injection only. For mild arsenic or gold poisoning, 2.5 mg/kg of body weight four times daily for two days, two times on the third day, and once daily thereafter for ten days; for severe arsenic or gold poisoning, 3 mg/kg every four hours for two-days, four times on the third day, then twice daily thereafter for ten days. For mercury poisoning, 5 mg/kg initially, followed by 2.5 mg/kg one or two times daily for ten days. For acute lead encephalopathy, 4 mg/kg body weight is given alone in the first dose and thereafter at four-hour intervals in combination with Edetate Calcium Disodium Injection USP administered at a separate site. For less severe poisoning the dose can be reduced to 3 mg/kg after the first dose. Treatment is maintained for two to seven days depending on clinical response. Successful treatment depends on beginning injections at the earliest possible moment and on the use of adequate amounts at frequent intervals. Other supportive measures should always be used in conjunction with BAL in Oil (Dimercaprol Injection USP) therapy.
BAL in Oil should be inspected visually for particulate matter and discoloration prior to administration.
What interacts with BAL in Oil?
BAL in Oil (Dimercaprol Injection USP) is contraindicated in most instances of hepatic insufficiency with the exception of postarsenical jaundice. The drug should be discontinued or used only with extreme caution if acute renal insufficiency develops during therapy.
What are the warnings of BAL in Oil?
Postpartum patients receiving methimazole should not nurse their babies.
What are the precautions of BAL in Oil?
Because the dimercaprol-metal complex breaks down easily in an acid medium, production of an alkaline urine affords protection to the kidney during therapy. Medicinal iron should not be administered to patients under therapy with BAL in Oil (Dimercaprol Injection USP).
BAL in Oil Ampules is formulated with peanut oil. Peanut oil may cause allergic reactions in some individuals. Physicians should use caution in prescribing BAL in Oil Ampules for peanut-sensitive patients. Medication and equipment necessary to treat allergic reactions should be available if the product is administered to peanut-allergic patients.
Pregnancy Category C
Animal reproduction studies have not been conducted with BAL in Oil. It is also not known whether BAL in Oil can cause fetal harm when administered to a pregnant woman, or can affect reproduction capacity. BAL in Oil should be given to a pregnant woman only if clearly needed.
It is not known whether this drug is excreted in human milk. However, because many drugs are excreted in human milk, caution should be exercised when BAL in Oil is administered to a nursing woman.
What are the side effects of BAL in Oil?
One of the most consistent responses to Dimercaprol Injection USP is a rise in blood pressure accompanied by tachycardia. This rise is roughly proportional to the dose administered. Doses larger than those recommended may cause other transitory signs and symptoms in approximate order of frequency as follows: (1) nausea and, in some instance, vomiting; (2) headache; (3) a burning sensation in the lips, mouth and throat; (4) a feeling of constriction, even pain, in the throat, chest, or hands; (5) conjunctivitis, lacrimation, blepharal spasm, rhinorrhea, and salivation; (6) tingling of the hands; (7) a burning sensation in the penis; (8) sweating of the forehead, hands and other areas; (9) abdominal pain; and (10) occasional appearance of painful sterile abscesses. Many of the above symptoms are accompanied by a feeling of anxiety, weakness, and unrest and often are relieved by administration of antihistamine.
What should I look out for while using BAL in Oil?
BAL in Oil (Dimercaprol Injection USP) is contraindicated in most instances of hepatic insufficiency with the exception of postarsenical jaundice. The drug should be discontinued or used only with extreme caution if acute renal insufficiency develops during therapy.
There may be local pain at the site of the injection. A reaction apparently peculiar to children is fever which may persist during therapy. It occurs in approximately 30% of children. A transient reduction of the percentage of polymorphonuclear leukocytes may also be observed.
What might happen if I take too much BAL in Oil?
Dosage exceeding 5 mg/kg will usually be followed by vomiting, convulsions and stupor, beginning within 30 minutes and subsiding within 6 hours following injection.
A
How should I store and handle BAL in Oil?
Store at controlled room temperature 20° to 25°C (68° to 77°F)Rx onlyManufactured by:Yung Shin Pharmaceutical Industrial Co., Ltd.Tachia, TaichungTaiwan, ROCRevision: April 2007Store at controlled room temperature 20° to 25°C (68° to 77°F)Rx onlyManufactured by:Yung Shin Pharmaceutical Industrial Co., Ltd.Tachia, TaichungTaiwan, ROCRevision: April 2007Store at controlled room temperature 20° to 25°C (68° to 77°F)Rx onlyManufactured by:Yung Shin Pharmaceutical Industrial Co., Ltd.Tachia, TaichungTaiwan, ROCRevision: April 2007Store at controlled room temperature 20° to 25°C (68° to 77°F)Rx onlyManufactured by:Yung Shin Pharmaceutical Industrial Co., Ltd.Tachia, TaichungTaiwan, ROCRevision: April 2007Store at controlled room temperature 20° to 25°C (68° to 77°F)Rx onlyManufactured by:Yung Shin Pharmaceutical Industrial Co., Ltd.Tachia, TaichungTaiwan, ROCRevision: April 20073 mL (100 mg/mL) ampules, box of 10 (NDC 11098-526-03).
Clinical Information
Chemical Structure
No Image foundClinical Pharmacology
The sulfhydryl groups of dimercaprol form complexes with certain heavy metals thus preventing or reversing the metallic binding of sulfhydryl-containing enzymes. The complex is excreted. The sustained presence of dimercaprol promotes continued excretion of the metallic poisons - arsenic, gold and mercury. It is also used in combination with Edetate Calcium Disodium Injection USP to promote the excretion of lead.
Non-Clinical Toxicology
BAL in Oil (Dimercaprol Injection USP) is contraindicated in most instances of hepatic insufficiency with the exception of postarsenical jaundice. The drug should be discontinued or used only with extreme caution if acute renal insufficiency develops during therapy.There may be local pain at the site of the injection. A reaction apparently peculiar to children is fever which may persist during therapy. It occurs in approximately 30% of children. A transient reduction of the percentage of polymorphonuclear leukocytes may also be observed.
Anticoagulants (oral)
ß-adrenergic blocking agents
Digitalis glycosides
Theophylline
Because the dimercaprol-metal complex breaks down easily in an acid medium, production of an alkaline urine affords protection to the kidney during therapy. Medicinal iron should not be administered to patients under therapy with BAL in Oil (Dimercaprol Injection USP).
BAL in Oil Ampules is formulated with peanut oil. Peanut oil may cause allergic reactions in some individuals. Physicians should use caution in prescribing BAL in Oil Ampules for peanut-sensitive patients. Medication and equipment necessary to treat allergic reactions should be available if the product is administered to peanut-allergic patients.
One of the most consistent responses to Dimercaprol Injection USP is a rise in blood pressure accompanied by tachycardia. This rise is roughly proportional to the dose administered. Doses larger than those recommended may cause other transitory signs and symptoms in approximate order of frequency as follows: (1) nausea and, in some instance, vomiting; (2) headache; (3) a burning sensation in the lips, mouth and throat; (4) a feeling of constriction, even pain, in the throat, chest, or hands; (5) conjunctivitis, lacrimation, blepharal spasm, rhinorrhea, and salivation; (6) tingling of the hands; (7) a burning sensation in the penis; (8) sweating of the forehead, hands and other areas; (9) abdominal pain; and (10) occasional appearance of painful sterile abscesses. Many of the above symptoms are accompanied by a feeling of anxiety, weakness, and unrest and often are relieved by administration of antihistamine.
Reference
This information is obtained from the National Institute of Health's Standard Packaging Label drug database.
"https://dailymed.nlm.nih.gov/dailymed/"
While we update our database periodically, we cannot guarantee it is always updated to the latest version.
Review
Read user comments about the side effects, benefits, and effectiveness of losartan oral.
Overall User Ratings
514Total User Reviews
User Reviews
Learn about
User Reviews
Professional
Clonazepam Description Each single-scored tablet, for oral administration, contains 0.5 mg, 1 mg, or 2 mg Clonazepam, USP, a benzodiazepine. Each tablet also contains corn starch, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and povidone. Clonazepam tablets USP 0.5 mg contain Yellow D&C No. 10 Aluminum Lake. Clonazepam tablets USP 1 mg contain Yellow D&C No. 10 Aluminum Lake, as well as FD&C Blue No. 1 Aluminum Lake. Chemically, Clonazepam, USP is 5-(o-chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has the following structural formula: C15H10ClN3O3 M.W. 315.72Tips
Tips
Interactions
Interactions
A total of 440 drugs (1549 brand and generic names) are known to interact with Imbruvica (ibrutinib). 228 major drug interactions (854 brand and generic names) 210 moderate drug interactions (691 brand and generic names) 2 minor drug interactions (4 brand and generic names) Show all medications in the database that may interact with Imbruvica (ibrutinib).