Disclaimer:
Medidex is not a provider of medical services and all information is provided for the convenience of the user. No medical decisions should be made based on the information provided on this website without first consulting a licensed healthcare provider.This website is intended for persons 18 years or older. No person under 18 should consult this website without the permission of a parent or guardian.
Bensal HP
Overview
What is Bensal HP?
Bensal HP ointment contains 30 mg salicylic acid per gram in a base containing: Benzoic acid, polyethylene glycol 400, polyethylene glycol 3350 and oak bark extract (QRB-7).
What does Bensal HP look like?

What are the available doses of Bensal HP?
Sorry No records found.
What should I talk to my health care provider before I take Bensal HP?
Sorry No records found
How should I use Bensal HP?
An external treatment for the inflammation and irritation associated with many common forms of dermatitis, including certain eczematoid conditions. These conditions include complications associated with pyodermas. Indicated also in the treatment of insect bites, burns and fungal infections.
Patients should be advised to follow these step-by-step instructions for application of Bensal HP Ointment:
Hands should be washed thoroughly.
When using tubes, the tip of the tube should not come into contact with the area to be treated; the tube should be recapped tightly after each application.
If applying with a cotton-tipped applicator, which is recommended, use once and discard.
Bensal HP Ointment should be applied twice a day for best results.
Gently rinse the area to be treated with saline or water and then pat dry. Bensal HP Ointment can be applied directly to the wound or placed on dry gauze and then placed on the wound. . Bensal HP is designed to provide moisture to the wound.
Spread a generous quantity of Bensal HP Ointment evenly over the desired area to yield a thin continuous layer of approximately 1/8 of an inch of thickness. There may be a mild warming sensation, or slight burning, to the treated area for 3-5 minutes after application. If irritation occurs or symptoms persist after 10 days, discontinue use and consult your physician.
Try to keep the area being treated clean and exposed to air when possible. Apply an appropriate dressing to shield the area from clothes or exposure to water or dirt.
If there is no improvement in the wound within 7 days, consult your physician for further evaluation of the wound. If there is no response to the ointment at all, then the wound should be re-evaluated for other contributing factors to the wound healing process.
What interacts with Bensal HP?
Bensal HP is contraindicated for use in those patients who are hypersensitive to topical polyethylene glycols.
What are the warnings of Bensal HP?
Sorry No Records found
What are the precautions of Bensal HP?
For external use only. Not to be used in eyes.
What are the side effects of Bensal HP?
Bensal HP is generally well tolerated and non-irritating. A small percentage of patients may experience a temporary burning sensation upon application of the ointment.
What should I look out for while using Bensal HP?
Bensal HP is contraindicated for use in those patients who are hypersensitive to topical polyethylene glycols.
What might happen if I take too much Bensal HP?
Sorry No Records found
How should I store and handle Bensal HP?
Store at 25°C (77°F); excursions permitted between 15°C to 30°C (59°F to 86°F) Levonorgestrel and ethinyl estradiol tablets USP (0.09 mg levonorgestrel USP and 0.02 mg ethinyl estradiol USP) are brownish peach to light brown, round, biconvex, film-coated tablets debossed with ‘E8’ on one side and are available as follows:Store at 20 to 25C (68° to 77F); excursions permitted to 15º to 30C (59º to 86F)References available upon request.Manufactured by:Glenmark Pharmaceuticals Ltd.Manufactured for:Glenmark Pharmaceuticals Inc., USAQuestions? 1 (888)721-7115www.glenmarkpharma.com/usaMay 2017Levonorgestrel and ethinyl estradiol tablets USP (0.09 mg levonorgestrel USP and 0.02 mg ethinyl estradiol USP) are brownish peach to light brown, round, biconvex, film-coated tablets debossed with ‘E8’ on one side and are available as follows:Store at 20 to 25C (68° to 77F); excursions permitted to 15º to 30C (59º to 86F)References available upon request.Manufactured by:Glenmark Pharmaceuticals Ltd.Manufactured for:Glenmark Pharmaceuticals Inc., USAQuestions? 1 (888)721-7115www.glenmarkpharma.com/usaMay 2017Levonorgestrel and ethinyl estradiol tablets USP (0.09 mg levonorgestrel USP and 0.02 mg ethinyl estradiol USP) are brownish peach to light brown, round, biconvex, film-coated tablets debossed with ‘E8’ on one side and are available as follows:Store at 20 to 25C (68° to 77F); excursions permitted to 15º to 30C (59º to 86F)References available upon request.Manufactured by:Glenmark Pharmaceuticals Ltd.Manufactured for:Glenmark Pharmaceuticals Inc., USAQuestions? 1 (888)721-7115www.glenmarkpharma.com/usaMay 2017Levonorgestrel and ethinyl estradiol tablets USP (0.09 mg levonorgestrel USP and 0.02 mg ethinyl estradiol USP) are brownish peach to light brown, round, biconvex, film-coated tablets debossed with ‘E8’ on one side and are available as follows:Store at 20 to 25C (68° to 77F); excursions permitted to 15º to 30C (59º to 86F)References available upon request.Manufactured by:Glenmark Pharmaceuticals Ltd.Manufactured for:Glenmark Pharmaceuticals Inc., USAQuestions? 1 (888)721-7115www.glenmarkpharma.com/usaMay 2017Levonorgestrel and ethinyl estradiol tablets USP (0.09 mg levonorgestrel USP and 0.02 mg ethinyl estradiol USP) are brownish peach to light brown, round, biconvex, film-coated tablets debossed with ‘E8’ on one side and are available as follows:Store at 20 to 25C (68° to 77F); excursions permitted to 15º to 30C (59º to 86F)References available upon request.Manufactured by:Glenmark Pharmaceuticals Ltd.Manufactured for:Glenmark Pharmaceuticals Inc., USAQuestions? 1 (888)721-7115www.glenmarkpharma.com/usaMay 2017Levonorgestrel and ethinyl estradiol tablets USP (0.09 mg levonorgestrel USP and 0.02 mg ethinyl estradiol USP) are brownish peach to light brown, round, biconvex, film-coated tablets debossed with ‘E8’ on one side and are available as follows:Store at 20 to 25C (68° to 77F); excursions permitted to 15º to 30C (59º to 86F)References available upon request.Manufactured by:Glenmark Pharmaceuticals Ltd.Manufactured for:Glenmark Pharmaceuticals Inc., USAQuestions? 1 (888)721-7115www.glenmarkpharma.com/usaMay 2017Levonorgestrel and ethinyl estradiol tablets USP (0.09 mg levonorgestrel USP and 0.02 mg ethinyl estradiol USP) are brownish peach to light brown, round, biconvex, film-coated tablets debossed with ‘E8’ on one side and are available as follows:Store at 20 to 25C (68° to 77F); excursions permitted to 15º to 30C (59º to 86F)References available upon request.Manufactured by:Glenmark Pharmaceuticals Ltd.Manufactured for:Glenmark Pharmaceuticals Inc., USAQuestions? 1 (888)721-7115www.glenmarkpharma.com/usaMay 2017Levonorgestrel and ethinyl estradiol tablets USP (0.09 mg levonorgestrel USP and 0.02 mg ethinyl estradiol USP) are brownish peach to light brown, round, biconvex, film-coated tablets debossed with ‘E8’ on one side and are available as follows:Store at 20 to 25C (68° to 77F); excursions permitted to 15º to 30C (59º to 86F)References available upon request.Manufactured by:Glenmark Pharmaceuticals Ltd.Manufactured for:Glenmark Pharmaceuticals Inc., USAQuestions? 1 (888)721-7115www.glenmarkpharma.com/usaMay 2017Levonorgestrel and ethinyl estradiol tablets USP (0.09 mg levonorgestrel USP and 0.02 mg ethinyl estradiol USP) are brownish peach to light brown, round, biconvex, film-coated tablets debossed with ‘E8’ on one side and are available as follows:Store at 20 to 25C (68° to 77F); excursions permitted to 15º to 30C (59º to 86F)References available upon request.Manufactured by:Glenmark Pharmaceuticals Ltd.Manufactured for:Glenmark Pharmaceuticals Inc., USAQuestions? 1 (888)721-7115www.glenmarkpharma.com/usaMay 2017
Clinical Information
Chemical Structure
No Image foundClinical Pharmacology
The mechanism of action of Bensal HP is not known. While the following animal data are available, their clinical significance is unknown. It has been demonstrated that Bensal HP significantly reduces methicillin-resistant Staphylococcus aureus (MRSA) protected by biofilms in wounds using porcine models. In addition, Bensal HP stimulates re-epithelialization of second-degree burns in porcine models.
Non-Clinical Toxicology
Bensal HP is contraindicated for use in those patients who are hypersensitive to topical polyethylene glycols.For external use only. Not to be used in eyes.
Bensal HP is generally well tolerated and non-irritating. A small percentage of patients may experience a temporary burning sensation upon application of the ointment.
Reference
This information is obtained from the National Institute of Health's Standard Packaging Label drug database.
"https://dailymed.nlm.nih.gov/dailymed/"
While we update our database periodically, we cannot guarantee it is always updated to the latest version.
Review
Professional
Clonazepam Description Each single-scored tablet, for oral administration, contains 0.5 mg, 1 mg, or 2 mg Clonazepam, USP, a benzodiazepine. Each tablet also contains corn starch, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and povidone. Clonazepam tablets USP 0.5 mg contain Yellow D&C No. 10 Aluminum Lake. Clonazepam tablets USP 1 mg contain Yellow D&C No. 10 Aluminum Lake, as well as FD&C Blue No. 1 Aluminum Lake. Chemically, Clonazepam, USP is 5-(o-chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has the following structural formula: C15H10ClN3O3 M.W. 315.72Tips
Tips
Interactions
Interactions
A total of 440 drugs (1549 brand and generic names) are known to interact with Imbruvica (ibrutinib). 228 major drug interactions (854 brand and generic names) 210 moderate drug interactions (691 brand and generic names) 2 minor drug interactions (4 brand and generic names) Show all medications in the database that may interact with Imbruvica (ibrutinib).