Disclaimer:

Medidex is not a provider of medical services and all information is provided for the convenience of the user. No medical decisions should be made based on the information provided on this website without first consulting a licensed healthcare provider.This website is intended for persons 18 years or older. No person under 18 should consult this website without the permission of a parent or guardian.

Isoplate

×

Overview

What is Isoplate?

ISOPLATE SOLUTION - Platelet Additive Solution [PAS-F] is an isotonic solution designed to replace a proportion of the plasma used in the storage of Platelet Pheresis, Leukocytes Reduced PAS products collected using a hyperconcentrated collection on Terumo BCT's Trima Accel system.

The solution is sterile, nonpyrogenic and contains no bacteriostatic or antimicrobial agents.

The formulas of the active ingredients are provided in Table 1.

Each 100 mL of ISOPLATE SOLUTION contains: Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 g; Sodium Acetate Trihydrate USP 0.37 g; Potassium Chloride USP 0.037 g; Magnesium Chloride Hexahydrate USP 0.03 g; Dibasic Sodium Phosphate Dihydrate USP 0.008 g; Monobasic Potassium Phosphate NF 0.00082 g; in Water for Injection USP.

pH may be adjusted with glacial Acetic Acid USP or Sodium Hydroxide NF pH: 7.4 (7.0-7.8).

Concentration of Electrolytes (mEq/liter): Sodium 141; Potassium 5; Magnesium 3; Chloride 98; Phosphate (HPO=4 ) 1 (0.5 mmole P/liter); Acetate (CH3COO–) 27; Gluconate (HOCH2(CHOH)4COO–) 23.

The polyolefin bag is not made with natural rubber latex or PVC. Di(2-ethylhexyl)phthalate (DEHP) is present only in sterile dock tube.

The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The solution contact layer is an elasticized polyolefin. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration. The bag is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.



What does Isoplate look like?



What are the available doses of Isoplate?

500 mL ISOPLATE SOLUTION - Platelet Additive Solution [PAS-F] is a sterile isotonic solution in a polyolefin bag. Each 100 mL contains: Sodium Chloride 0.53 g; Sodium Gluconate 0.5 g; Sodium Acetate Trihydrate 0.37 g; Potassium Chloride 0.037 g; Magnesium Chloride Hexahydrate 0.03 g; Dibasic Sodium Phosphate Dihydrate 0.008 g; Monobasic Potassium Phosphate 0.00082 g; in Water for Injection.

What should I talk to my health care provider before I take Isoplate?

ISOPLATE SOLUTION has not been adequately studied in controlled clinical trials with specific populations.

How should I use Isoplate?

ISOPLATE SOLUTION - Platelet Additive Solution [PAS-F] is an isotonic solution to replace a portion of the plasma to store Platelets Pheresis Platelet Additive Solution (PAS) Added Leukocytes Reduced products collected using a hyperconcentrated collection on Terumo BCT's Trima Accel system

Platelets Pheresis PAS Added Leukocytes Reduced products are stored in a mix of 65% ISOPLATE SOLUTION and 35% plasma. Platelets in the solution can be stored at a concentration range of 0.7 to 2.1 × 10/µL for up to 5 days at 20-24 °C with continuous agitation in the Terumo BCT ELP bag [citrated polyvinyl chloride (PVC)]

ISOPLATE SOLUTION is added to hyperconcentrated platelets after the apheresis procedure is complete. It is not intended for direct intravenous infusion.

ISOPLATE SOLUTION may only be used with the Trima Accel system for automated blood collection. For instructions on the use of the solution with the Trima Accel system, see the Trima Accel system operator's manual.


What interacts with Isoplate?

Sorry No Records found


What are the warnings of Isoplate?

Sorry No Records found


What are the precautions of Isoplate?

Sorry No Records found


What are the side effects of Isoplate?

Sorry No records found


What should I look out for while using Isoplate?

DO NOT INFUSE ISOPLATE SOLUTION DIRECTLY TO THE PATIENTS.


What might happen if I take too much Isoplate?

Sorry No Records found


How should I store and handle Isoplate?

Receipt, transfer, handling, possession, or use of this product is subject to the radioactive material regulations and licensing requirements of the U.S. Nuclear Regulatory Commission, Agreement States or Licensing States as appropriate.ISOPLATE SOLUTION - Platelet Additive Solution [PAS-F] is a clear solution supplied in sterile and nonpyrogenic polyolefin bags. The ISOPLATE SOLUTION bags are packaged 18 bags per case.


×

Clinical Information

Chemical Structure

No Image found
Clinical Pharmacology

Non-Clinical Toxicology
DO NOT INFUSE ISOPLATE SOLUTION DIRECTLY TO THE PATIENTS.

Verify that the ISOPLATE SOLUTION has been securely attached to the platelet additive solution line on the Trima Accel system tubing set using aseptic technique. ()

ISOPLATE SOLUTION is added to platelets after the apheresis procedure is complete. It is not for direct intravenous infusion. It is expected to cause adverse events that are normally associated with platelet transfusion.

×

Reference

This information is obtained from the National Institute of Health's Standard Packaging Label drug database.
"https://dailymed.nlm.nih.gov/dailymed/"

While we update our database periodically, we cannot guarantee it is always updated to the latest version.

×

Review

Rate this treatment and share your opinion


Learn about User Reviews

Helpful tips to write a good review:

  1. Only share your first hand experience as a consumer or a care giver.
  2. Describe your experience in the Comments area including the benefits, side effects and how it has worked for you. Do not provide personal information like email addresses or telephone numbers.
  3. Fill in the optional information to help other users benefit from your review.

Reason for Taking This Treatment

(required)

Click the stars to rate this treatment

Effectiveness (required)

This medication has worked for me.




Ease of Use (required)

This medication has been easy for me to use.




Satisfaction (required)

Overall, I have been satisfied with my experience.




Write a brief description of your experience with this treatment:

2000 characters remaining

Optional Information

Help others benefit from your review by filling in the information below.
I am a:
Gender:
×

Professional

Clonazepam Description Each single-scored tablet, for oral administration, contains 0.5 mg, 1 mg, or 2 mg Clonazepam, USP, a benzodiazepine. Each tablet also contains corn starch, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and povidone. Clonazepam tablets USP 0.5 mg contain Yellow D&C No. 10 Aluminum Lake. Clonazepam tablets USP 1 mg contain Yellow D&C No. 10 Aluminum Lake, as well as FD&C Blue No. 1 Aluminum Lake. Chemically, Clonazepam, USP is 5-(o-chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has the following structural formula: C15H10ClN3O3 M.W. 315.72
×

Tips

Tips

×

Interactions

Interactions

A total of 440 drugs (1549 brand and generic names) are known to interact with Imbruvica (ibrutinib). 228 major drug interactions (854 brand and generic names) 210 moderate drug interactions (691 brand and generic names) 2 minor drug interactions (4 brand and generic names) Show all medications in the database that may interact with Imbruvica (ibrutinib).